Customer Portal > Engine Profile

To update the compliance status for an engine, click on the Edit icon next to the engine serial number to enter the edit mode.

Figure 1

If you see a disabled Edit icon for an engine, that means the engine has reached the end state for the Service Bulletin, no update can be taken.

Figure 2

Once in the edit mode, select the compliance status. 

Figure 3

If you select Complied, you must select the Compliance Date and Compliance Type.  Optionally, you can also record the Compliance Site, Inspection result, Notes.

If the Service Bulletin is not applicable to the engine, select NA as the compliance status.  If you do not have any compliance information, No Data should be selected.  When NA or No Data is selected for the compliance status, no other information will be collected for this engine.

To save the data entered, click on the Save icon.

Figure 4

To cancel the update, click on the Undo icon on the left

Figure 5